Next: Sensitivity
Up: Measured Performance
Previous: Imaging Resolution
Contents
The spectral resolution has been measured in the laboratory with
detectors that are representative of the flight units, and afterwards
with flight model detectors and pre-amplifiers. An example spectrum
obtained in this way is shown in Figure . The measured
energy resolution as a function of energy for an individual detector
is given in Figure .
Figure:
Example spectrum taken with laboratory
detector units, representative of the onboard ones.
|
Figure:
The measured energy resolution of an
individual SPI detector. This was measured using laboratory
detectors. The resolution of the full instrument with all 19
detectors is slightly lower than this.
|
inthelp@sciops.esa.int