Table:
ibis_science_analysis parameters description.
Query parameters are marked with bold font.
|
|
|
|
|
|
Name |
Type |
Description |
|
|
|
General parameters |
ogDOL |
string |
DOL of the Observational Group to be analyzed.
default: ``og_ibis.fits'' |
|
|
|
startLevel |
string |
Analysis level at which the analysis
begins. The names of the possible analysis levels
are given in section .
Possible values: ``COR'' - ``COMP''. Also
``CLEAN'' value is possible.
default: ``COR'' |
|
|
|
endLevel |
string |
Analysis level at which
analysis finishes. The names of the possible analysis levels
are given in the section .
possible values: COR - CLEAN.
We recommend you to proceed by steps,
as described in the cookbook.
default: ``IMA2'' |
|
|
|
staring |
boolean |
Enter yes if it was a staring observation. It
has an influence on PICsIT analysis -
for staring observation all shadowgrams are summed before the deconvolution.
default: no |
|
|
|
tolerance |
real |
tolerance for staring. In case of
staring=yes the check is performed that during the
Science Windows within the Observation Group the spacecraft was stable
within the given tolerance.
default: 0.1 |
|
|
|
sum_spectra |
boolean |
Do the summing of spectra?
default: ``no'' |
|
|
|
CAT_refCat |
string |
DOL of Reference Catalog
default: ``$ISDC_REF_CAT[ISGRI_FLAG>0]'' |
|
|
|
CAT_usrCat |
string |
DOL of User Catalog (CURRENTLY IGNORED!!!)
|
|
|
|
chatter |
integer |
Verbosity level
possible values: 0 - 5,
0 = errors only, 1 = warnings, 2 = normal, ...
default: 2 |
|
|
|
IC_Group |
string |
DOL of Instrument Characteristics master group
default:
``$REP_BASE_PROD/idx/ic/ic_master_file.fits'' |
|
|
|
IC_Alias |
string |
Selection alias for Instrument Characteristics
default: ``OSA'' |
|
|
|
corrDol |
string |
DOL of the isgri off-axis corrections
default: `` '' |
|
|
|
rebinned_corrDol_ima |
string |
DOL of the rebinned isgri off-axis corrections for imaging
default: `` '' |
|
|
|
rebinned_corrDol_spe |
string |
DOL of the rebinned isgri off-axis corrections for spectrum
default: `` '' |
|
|
|
rebinned_corrDol_lc |
string |
DOL of the rebinned isgri off-axis corrections for lc
default: `` '' |
|
|
|
rebinned_backDol_ima |
string |
DOL of the rebinned isgri back corrections for imaging
default: `` '' |
|
|
|
rebinned_backDol_spe |
string |
DOL of the rebinned isgri back corrections for spectrum
default: `` '' |
|
|
|
rebinned_backDol_lc |
string |
DOL of the rebinned isgri back corrections for lc
default: `` '' |
|
|
|
GENERAL_clobber |
boolean |
Clobber existing output data?
default: YES |
|
|
|
GENERAL_levelList |
boolean |
List of all levels
default:
COR,GTI,DEAD,BIN_I,BKG_I,CAT_I,IMA,IMA2,BIN_S,SPE,LCR,COMP,CLEAN |
|
|
|
Parameters to define which part of data should be
analyzed |
SWITCH_disableIsgri |
boolean |
Disable ISGRI analysis?
possible values: YES, NO
default: NO |
|
|
|
SWITCH_disablePICsIT |
boolean |
Disable PICsIT analysis?
possible values: YES, NO
default: YES |
|
|
|
SWITCH_disableCompton |
boolean |
Disable Compton analysis?
possible values: YES, NO
default: YES |
|
|
|
SWITCH_osimData |
boolean |
Data are from simulator?
possible values: YES, NO
default: NO |
|
|
|
Parameters for ibis binning and ibis image reconstruction |
IBIS_II_ChanNum |
integer |
Number of output energy bands for ISGRI
possible values: -1 - 10
value -1 is for more than 10 energy bands, in this case
IBIS_II_inEnergyValues should be set.
default: 4 |
|
|
|
IBIS_II_E_band_min |
string |
List of lower limits of output energy
bands (keV) for ISGRI
default: ``20 40 60 100'' |
|
|
|
IBIS_II_E_band_max |
string |
List of upper limits of output energy
bands (keV) for ISGRI
default: ``40 60 100 200'' |
|
|
|
IBIS_II_inEnergyValues |
string |
DOL of the energy values when required.
default: `` '' |
|
|
|
IBIS_IPS_corrPDH |
integer |
(for PICsIT only) Packets threshold for partially downloaded
histograms.
default:0 |
|
|
|
IBIS_IPS_ChanNum |
integer |
Number of Energy bands for PICsIT in standard
mode.
possible values: 0 - 256
You should set it to -1 to build automatically the only binning
for which background maps
are present. It corresponds to the following energy ranges (keV): 203
-252, 252 - 329, 329 - 455,
455 - 655, 655 - 1057, 1057 - 1841, 1841 - 3570, 3570 - 6510.
default: -1 |
|
|
|
IBIS_IPS_E_band_min_s |
string |
List of lower energy boundary for
PICsIT in standard mode for SINGLE.
Do not touch this parameter!
default: '''' |
|
|
|
IBIS_IPS_E_band_max_s |
string |
List of higher energy boundary for
PICsIT in standard mode for SINGLE.
Do not touch this parameter!
default: ``'' |
|
|
|
IBIS_IPS_E_band_min_m |
string |
List of lower energy boundary for
PICsIT in standard mode for MULTIPLE.
Do not touch this parameter!
default: ``'' |
|
|
|
IBIS_IPS_E_band_max_m |
string |
List of higher energy boundary for
PICsIT in standard mode for MULTIPLE.
Do not touch this parameter!
default: ``'' |
|
|
|
IBIS_IP_ChanNum |
integer |
Number of Energy bands for PICsIT in
photon-by-photon mode.
possible values: 1 - 300
Do not touch this parameter!
default: 3 |
|
|
|
IBIS_IP_E_band_min_s |
string |
List of lower energy boundary
(single) for PICsIT
Do not touch this parameter!
default (keV):
``175 600 1000'' |
|
|
|
IBIS_IP_E_band_max_s |
string |
List of higher energy boundary
(single) for PICsIT
Do not touch this parameter!
default (keV):
``600 1000 10000'' |
|
|
|
IBIS_IP_E_band_min_m |
string |
List of lower energy boundary
(multiple) for PICsIT
Do not touch this parameter!
default (keV):
``350 600 1000'' |
|
|
|
IBIS_IP_E_band_max_m |
string |
List of higher energy boundary
(multiple) for PICsIT
Do not touch this parameter!
default (keV):
``600 1000 13500'' |
|
|
|
IBIS_NoisyDetMethod |
integer |
Noisy Pixel detection method
possible values: 0 (only normal noisy detection), 1 (add also spectral noisy detection)
default: 1 |
|
|
|
These parameters are recommended by the IBIS team,
better not to change them. |
IBIS_min_rise |
integer |
Minimum rise time.
default: 16 |
|
|
|
IBIS_max_rise |
integer |
Maximum rise time.
default:116 |
|
|
|
IBIS_P_convFact |
real |
Conversion factor channel-to-energy.
default: 7.1 |
|
|
|
ModPixShad |
integer |
Minimum number of non-illuminated pixels per module
possible values: 100 - 500
default:400 |
|
|
|
Parameters specific to SCW1 pipeline. |
SCW1_ISGRI_event_select |
string |
CFITSIO event selection string
default: `` '' |
|
|
|
SCW1_GTI_LimitTable |
string |
DOL of the limit table for GTIs
default: `` '' |
|
|
|
SCW1_GTI_attTolerance_X |
real |
Accepted attitude stability tolerance of X (optical) axis to generate a GTI [arc min]
possible values: 0 - 10800
default: 0.5 |
|
|
|
SCW1_GTI_attTolerance_Z |
real |
Accepted attitude stability tolerance of Z axis to generate a GTI [arc min]"
possible values: 0 - 10800
default: 3.0 |
|
|
|
SCW1_GTI_gtiUserP |
string |
DOL of the user GTI table for PICsIT
default: `` '' |
|
|
|
SCW1_GTI_gtiUserI |
string |
DOL of the user GTI table for ISGRI
default: `` '' |
|
|
|
SCW1_GTI_TimeFormat |
string |
Time format to be used
possible values: ``IJD'', ``UTC'', ``OBT''
default: ``IJD'' |
|
|
|
SCW1_GTI_Accuracy |
string |
Used accuracy for OBT to IJD conversion and
vice versa
possible values: ``any'', ``inaccurate'',
``accurate''
default: ``any'' |
|
|
|
SCW1_GTI_SCP |
string |
Names of spacecraft GTIs to be merged for PICsIT
default: `` '' |
|
|
|
SCW1_GTI_SCI |
string |
Names of spacecraft GTIs to be merged for ISGRI
default: `` '' |
|
|
|
SCW1_GTI_PICsIT |
string |
GTIs to be merged for PICsIT
default:
``VETO ATTITUDE P_SGLE_DATA_GAPS P_MULE_DATA_GAPS'' |
|
|
|
SCW1_GTI_ISGRI |
string |
GTIs to be merged for ISGRI
default: ``VETO ATTITUDE ISGRI_DATA_GAPS'' |
|
|
|
SCW1_GTI_BTI_Dol |
string |
DOL of a bad time interval table
(GNRL-INTL-BTI)
default: ``IBIS_CONFIGURATION IBIS_BOOT ISGRI_RISE_TIME VETO_PROBLEM SOLAR_FLARE BELT_CROSSING'' |
|
|
|
SCW1_GTI_BTI_Names |
string |
Input BTI names to be considered
default: `` '' |
|
|
|
SCW1_ICOR_idxSwitch |
string |
DOL of the index of pixels switches list.
default: `` '' |
|
|
|
SCW1_ICOR_GODOL |
string |
DOL of the gain-offset table
default: `` '' |
|
|
|
SCW1_ICOR_supGDOL |
string |
DOL of gain coefficients for 2nd method
default: `` '' |
|
|
|
SCW1_ICOR_supODOL |
string |
DOL of offset coefficients for 2nd method"
default: `` '' |
|
|
|
SCW1_ICOR_riseDOL |
string |
DOL of the rise time correction table
default: `` '' |
|
|
|
switDOL |
string |
switch on time
default: `` '' |
|
|
|
SCW1_ICOR_rtcDOL |
string |
rise time correction
default: `` '' |
|
|
|
SCW1_RTdriftCor |
integer |
RT correction level increasing from 0 to 2.If 0, no RT correction, 2 RT drift included into corrections, 1 default value
default: 1 |
|
|
|
SCW1_ICOR_probShot |
real |
Probability of shot time decay.
default: 0.0001 |
|
|
|
SCW1_PCOR_enerDOL |
string |
DOL of the energy correction table (PICsIT)
default: `` '' |
|
|
|
SCW1_BIN_cleanTrk |
integer |
Cleaning of cosmic-ray induced events.
possible values:
0 = No
1 = Yes
default: 1 |
|
|
|
SCW1_veto_mod |
string |
DOL of the IC file for VETO model and width of Compton window
default: `` '' |
|
|
|
SCW1_BIN_I_idxNoisy |
string |
DOL of the index of noisy maps.
default: `` '' |
|
|
|
SCW1_BIN_I_idxLowThre |
string |
index of Low Threshold
default: `` '' |
|
|
|
SCW1_BIN_P_inDead |
string |
DOL of the dead time data structure.
default: `` '' |
|
|
|
SCW1_BIN_P_inGTI |
string |
DOL of the good time interval data structure.
default: `` '' |
|
|
|
SCW1_BIN_P_PicsCxt |
string |
DOL of the PICsIT Context Tables.
default: `` '' |
|
|
|
SCW1_BIN_P_HepiLut |
string |
DOL of the hepi lut
default: `` '' |
|
|
|
SCW1_BKG_divide |
boolean |
Divide by efficiency? Do not touch it!
default: no |
|
|
|
SCW1_BKG_badpix |
boolean |
Remove bad pixels? Do not touch it!
default: yes |
|
|
|
SCW1_BKG_flatmodule |
boolean |
flatten modules? Do not touch it!
default: no |
|
|
|
SCW1_BKG_I_isgrUnifDol |
string |
DOL of the ISGRI detector uniformity
possible values:
DOL for a specific model
``-'' - no uniformity correction
`` '' - DOL is taken from the IC tree
default: ``-'' |
|
|
|
SCW1_BKG_I_isgrBkgDol |
string |
DOL of the ISGRI background model
possible values:
DOL for a specific model
``-'' - no background subtraction
`` '' - DOL is taken from the IC tree
default: `` '' |
|
|
|
SCW1_BKG_I_method_cor |
integer |
Method to be applied for background
removal
possible values:
0 - no background correction
1 - background from IC tree is applied to the whole detector
2 - background is threaded for each module separately
When using 1 or 2, brPif and brPifThreshold parameters
are taken into account.
default: ``1'' |
|
|
|
brSrcDOL |
string |
DOL of the bright sources catalogue, which will be removed from background mean calculation
default: ``$ISDC_REF_CAT[ISGRI_FLAG>0&&ISGR_FLUX_1>100]'' |
|
|
|
SCW1_BKG_I_brPifThreshold |
real |
pixels with PIF value higher will be removed from background calculation.
When = 1, bright PIF removal will not be performed
possible values: ``0 - 1 ''
default: ``0.0001'' |
|
|
|
SCW1_BKG_I_pif |
string |
filename of the pif in every ScW
default: `` '' |
|
|
|
SCW1_BKG_I_method_int |
integer |
Method to be applied for the pixel
value interpolation
possible values:
0 - pixels in dead zones are filled with zeros
1 - pixels are filled with mean detector value
default: ``1'' |
|
|
|
tungAtt |
string |
DOL of the Tungsten attenuation length fits file
default: `` '' |
|
|
|
aluAtt |
string |
DOL of the Aluminium attenuation length fits file
default: `` '' |
|
|
|
leadAtt |
string |
DOL of the Lead attenuation length fits file
default: `` '' |
|
|
|
SCW1_BKG_P_method |
integer |
Method applied in filling gaps
possible values:
0 - model (in cts) is normalized by the time of observation
1 - model (in cts) is normalized by the mean count value
default: 0 |
|
|
|
SCW1_BKG_picsSUnifDOL |
string |
DOL of the PICsIT Detector Uniformity
model (single).
default: ``-'' |
|
|
|
SCW1_BKG_picsSBkgDOL |
string |
DOL of the PICsIT Detector Background
model (single).
default: `` '' |
|
|
|
SCW1_BKG_picsMUnifDOL |
string |
DOL of the PICsIT Detector Uniformity
model (multiple).
default: ``-'' |
|
|
|
SCW1_BKG_picsMBkgDOL |
string |
DOL of the PICsIT Detector Background
model (multiple).
default: `` '' |
|
|
|
Parameters specific to OBS1 pipeline. |
ii_skyimage parameters |
OBS1_DataMode |
integer |
Data Simulation mode
possible values:
0 - shadowgrams are treated
1 - shadowgrams are simulated
default: 0 |
|
|
|
rebin_slope |
real |
Spectral slope to be used
default: -2 |
|
|
|
rebin_arfDol |
string |
DOL of the ISGRI arf for rebinning.
default: `` '' |
|
|
|
OBS1_SearchMode |
integer |
Source search mode
possible values for the Science Window analysis:
1 - search for all catalog sources
2 - search for K sources,where K= ToSearch
3 - search for all catalog sources plus for K significant
excesses,where K = ToSearch
For all the above, when the mosaic is created, the software looks for K =
ToSearch sources.
default: 3 |
|
|
|
OBS1_ToSearch |
integer |
Number of sources to be looked for
default: 50 |
|
|
|
OBS1_CleanMode |
integer |
Ghost cleaning
possible values:
1 - source model lobes are subtracted from the deconvolved image
-1 - no subtraction
default: 1 |
|
|
|
OBS1_ExtenType |
integer |
Save exposure/residual maps
possible values: absent, 0 - 3,
0 or absent - no action
1 - true exposure maps are saved in 4*n extension of isgri_sky_ima.fits
instead of residual images
2 - true exposure maps are saved in the 5*n extension of
isgri_sky_ima.fits after the residual images
3 - one true exposure map is created for the last energy band
and saved in the last extension of isgri_sky_ima.fits
default: 2 |
|
|
|
OBS1_NegModels |
integer |
0 or absent for no negative models ; 1 - negative models
default: 0 |
|
|
|
OBS1_FastOpen |
integer |
if 1 then no CommonPreparePars
default: 1 |
|
|
|
ISGRI_mask |
string |
DOL of the MASK pattern fits file
default: `` '' |
|
|
|
OBS1_deco |
string |
DOL of the projected decoding pattern fits file
default: `` '' |
|
|
|
OBS1_covrMod |
string |
DOL of the covariance fits file
default: ``'' |
|
|
|
OBS1_ScwType |
string |
Type of Science Window to be treated
possible values: ``POINTING'', ``SLEW'',
``OTHER'', ``ANY''
default: ``POINTING'' |
|
|
|
OBS1_DoPart2 |
integer |
if 1 or absent
do mosaic part.
Set it to 0 if don't want to produce a mosaic image.
Set it to 2 if you want to produce a mosaic image
from different existing runs.
default: 1 |
|
|
|
OBS1_MapAlpha |
real |
Mosaic map center [deg]
default: "" |
|
|
|
OBS1_MapDelta |
real |
Mosaic map center [deg]
default: "" |
|
|
|
OBS1_MapSize |
real |
Mosaic map radius [deg]
default: 40.0 |
|
|
|
OBS1_PixSpread |
integer |
0 - no flux spread in mosaic
default: 1 |
|
|
|
OBS1_MinCatSouSnr |
real |
The software detects a catalog source only if its
signal-to-noise ratio
is higher than this value.
default: 6 |
|
|
|
OBS1_MinNewSouSnr |
real |
The software detects a catalog source only if its
signal-to-noise ratio
is higher than this value.
default: 7 |
|
|
|
OBS1_SouFit |
integer |
defines whether to fit or not the source position
0 - for fitting source position in ScW fit
1 - for fixed source position in ScW fit
default: 0 |
|
|
|
PICSIT_detThr |
real |
Detection Threshold
default: 3.0 |
|
|
|
PICSIT_inCorVar |
integer |
Corrected variance to be used [0=NO; 1=YES]
default: 1 |
|
|
|
PICSIT_outVarian |
integer |
Variance maps in output [0=NO; 1=YES]
default: 0 |
|
|
|
cat_extract parameters, see Section
for more details. |
OBS1_CAT_radiusMin |
string |
Low limit for the position selection.
default: ``0'' |
|
|
|
OBS1_CAT_radiusMax |
string |
High limit for the position selection.
default: ``20'' |
|
|
|
OBS1_CAT_fluxDef |
string |
Column used for flux selection.
default: `` '' |
|
|
|
OBS1_CAT_fluxMin |
string |
Low limit for flux selection.
default: `` '' |
|
|
|
OBS1_CAT_fluxMax |
string |
High limit for flux selection.
default: `` '' |
|
|
|
OBS1_CAT_class |
string |
Select the object by class.
default: `` '' |
|
|
|
OBS1_CAT_date |
real |
IJD for the public data.
default:
1 |
|
|
|
Parameters specific to SCW2 pipeline. |
PICSIT_deco |
string |
DOL of the MASK decoding fits file
default: `` '' |
|
|
|
SCW2_cat_for_extract |
string |
Catalog for spectral and lightcurve extraction
(if empty then it is taken from the imaging result of the Science Window)
default: `` '' |
|
|
|
SCW2_racolumn |
string |
Name of the column where to get
Ra
default: ``RA_FIN'' |
|
|
|
SCW2_deccolumn |
string |
Name of the column where to
get Dec
default: ``DEC_FIN'' |
|
|
|
SCW2_catalog |
string |
Catalog for PICsIT imaging
default: `` '' |
|
|
|
SCW2_PIF_filter |
string |
filter to apply on the source
default: `` '' |
|
|
|
SCW2_ISGRI_event_select |
string |
CFITSIO event selection string
default: `` '' |
|
|
|
parameter for building light curves from PICsIT
spectral timing data |
Parameters for spectra extraction. |
IBIS_SI_ChanNum |
integer |
Number of Channels
possible values: -1 - 10,
-1 = take from ISGR-EBDS-MOD structure.
In this case parameter IBIS_SI_inEnergyValues
must contain the DOL of the rebinned matrix.
default: -1 |
|
|
|
IBIS_SI_E_band_min |
string |
List of lower limits of output energy bands
default: `` '' |
|
|
|
IBIS_SI_E_band_max |
string |
List of upper limits of output energy bands
default: `` '' |
|
|
|
IBIS_SI_inEnergyValues |
string |
DOL of the energy values when required.
default: `` '' |
|
|
|
PICSIT_source_name |
string |
Name of the source for extracting PICsIT spectrum
default: `` '' |
|
|
|
PICSIT_source_RA |
real |
RA of the source for extracting PICsIT spectrum
default: `` '' |
|
|
|
PICSIT_source_DEC |
real |
DEC of the source for extracting PICsIT spectrum
default: `` '' |
|
|
|
IBIS_SS_inEnergyValues |
string |
DOL of the energy values for single
PICsIT events
default: `` '' |
|
|
|
IBIS_SM_inEnergyValues |
string |
DOL of the energy values for multiple
PICsIT events
default: `` '' |
|
|
|
IBIS_SP_ChanNum |
integer |
Number of Channels for PICsIT
possible values: 0 - 300
default: 51 |
|
|
|
IBIS_SP_E_band_min_s |
string |
List of lower limits of output
energy bands (PICsIT single events)
default: `` '' |
|
|
|
IBIS_SP_E_band_max_s |
string |
List of upper limits of output
energy bands (PICsIT single events)
default: `` '' |
|
|
|
IBIS_SP_E_band_min_m |
string |
List of lower limits of output
energy bands (PICsIT multiple events)
default: `` '' |
|
|
|
IBIS_SP_E_band_max_m |
string |
List of upper limits of output
energy bands (PICsIT multiple events)
default: `` '' |
|
|
|
IBIS_SPS_ChanNum |
integer |
Number of Channels for PICsIT
possible values: -1 - 256
default: -1 |
|
|
|
IBIS_SPS_E_band_min_s |
string |
List of lower limits of output energy
bands
for SINGLE PICsIT events
default: `` '' |
|
|
|
IBIS_SPS_E_band_max_s |
string |
List of upper limits of output energy
bands
for SINGLE PICsIT events
default: `` '' |
|
|
|
IBIS_SPS_E_band_min_m |
string |
List of lower limits of output energy
bands
for multiple PICsIT events
default: `` '' |
|
|
|
IBIS_SPS_E_band_max_m |
string |
List of upper limits of output energy
bands
for multiple PICsIT events
default: `` '' |
|
|
|
SCW2_ISPE_idx_isgrResp |
string |
DOL of the index of ISGRI response matrices
default: ``'' |
|
|
|
SCW2_ISPE_isgrarf |
string |
DOL of the ARFs for XSPEC
default: ``'' |
|
|
|
SCW2_ISPE_DataMode |
integer |
Data Simulation mode
default: 0 |
|
|
|
SCW2_ISPE_MethodInt |
integer |
Method to be applied for the pixel value
interpolation
default: 1 |
|
|
|
SCW2_ISPE_MethodFit |
integer |
Method to be applied for background and
source intensity fitting
default: 6 |
|
|
|
SCW2_ISPE_isgrUnifDol |
string |
DOL of the ISGRI detector uniformity
default: ``'' |
|
|
|
SCW2_BIN_cleanTrk |
integer |
Cleaning of cosmic-ray induced events.
possible values:
0 = No
1 = Yes
default: 0 |
|
|
|
SCW2_BIN_I_idxNoisy |
string |
DOL of the index of noisy maps.
default: ``'' |
|
|
|
SCW2_BIN_I_idxLowThre |
string |
index of Low Threshold
default: ``'' |
|
|
|
SCW2_BIN_P_inDead |
string |
DOL of the dead time data structure.
default: ``'' |
|
|
|
SCW2_BIN_P_inGTI |
string |
DOL of the good time interval data structure.
default: ``'' |
|
|
|
SCW2_BIN_P_PicsCxt |
string |
DOL of the PICsIT Context Tables.
default: `` '' |
|
|
|
SCW2_BIN_P_HepiLut |
string |
DOL of the hepi lut
default: ``'' |
|
|
|
SCW2_BKG_I_isgrBkgDol |
string |
DOL of the isgri bckg model or - if you want none or empty if you want DOL automatic from the IC tree
default: ``'' |
|
|
|
SCW2_BKG_divide |
boolean |
Divide by efficiency
default: no |
|
|
|
SCW2_BKG_badpix |
boolean |
Remove bad pixels
default: yes |
|
|
|
SCW2_BKG_flatmodule |
boolean |
flatten modules
default: no |
|
|
|
SCW2_BKG_I_method_cor |
string |
Method to be applied for background
removal
possible values:
0 - background from IC tree is applied to the whole detector
1 - parameter switches to this value automatically when background map
is specified (not an IC one)
2 - background is threaded for each module separately
When using 1 or 2, brPif and brPifThreshold parameters
are taken into account.
default: ``2'' |
|
|
|
SCW2_BKG_I_method_int |
string |
Method to be applied for the pixel
value interpolation
possible values:
0 - pixels in dead zones are filled with zeros
1 - pixels are filled with mean detector value
default: ``1'' |
|
|
|
SCW2_BKG_P_method |
integer |
Method applied in filling gaps
possible values: 0 - 2
default: 1 |
|
|
|
SCW2_BKG_picsSUnifDOL |
string |
DOL of the PICsIT Detector Uniformity
model (single).
default: ``'' |
|
|
|
SCW2_BKG_picsSBkgDOL |
string |
DOL of the PICsIT Detector Background
model (single).
default: ``-'' |
|
|
|
SCW2_BKG_picsMUnifDOL |
string |
DOL of the PICsIT Detector Uniformity
model (multiple).
default: ``'' |
|
|
|
SCW2_BKG_picsMBkgDOL |
string |
DOL of the PICsIT Detector Background
model (multiple).
default: ``-'' |
|
|
|
Parameters for lightcurve extraction. |
ILCR_select |
string |
Event selection condition
default: ``'' |
|
|
|
ILCR_delta_t |
real |
Time bin in seconds.
possible values: 0.1 - 10000
default: 100 |
|
|
|
ILCR_num_e |
integer |
Number of energy channels
possible values: 1 - 10
default: 4 |
|
|
|
ILCR_e_min |
string |
List of low energy boundaries
default: ``20 40 60 100'' |
|
|
|
ILCR_e_max |
string |
List of high energy boundaries
default: ``40 60 100 200'' |
|
|
|
Parameters for PICsIT mosaic extraction. |
OBS2_detThr |
real |
Detection Threshold (in sigmas).
default: 3.0 |
|
|
|
OBS2_projSel |
string |
Selection of projection
default: STG |
|
|
|
OBS2_imgSel |
string |
Selection criteria of images.
default: "EVT_TYPE=='SINGLE' && E_MIN==252 &&
E_MAX==336" |
|
|
|
|
|
|